(1) It is best to use good-quality potable distilled water or filtered clean rain water to make the colloidal silver.Other types of water can also be used but the results may not be as good. Some types of water such as tap water contain chlorine and this results in a bluish-white product of silver chloride, which can be used but is not as good as the colloidal silver.
(2) Fill a clean glass with suitable water.Screw the silver wire electrodes into the connector - block and place the colloidal - silver - maker on top of the glass with the silver wires dipping into the water as shown in the picture
(3) You can use battery or mains-adaptor to run the colloidal - silver - maker. To use a battery,first plug the battery adaptor into the socket at the back of the colloidal - silver - maker. Then connect a 9 - volt (or 8.4 - volt rechargeable)battery onto the battery clip. You may hold it there with an elastic band to prevent it coming off. As soon as the battery is connected, the unit will start to make colloidal silver, and it will stop when the battery is removed. Do not unplug the adaptor from the socket with the battery connected - unplug the battery first.
(4) To use a mains - adaptor. Unregulated type; set it to 6-volts or 7 1/2 -volts with inner positive. Regulated type set it to 9-volts or 12-volts with inner positive. If it does not say 'regulated' on the adaptor treat it as an unregulated one and do not set it over 7 1/2 volts. Plug the adaptor in to the socket on the colloidal - silver - maker and switch it on. The unit will start to make colloidal silver,and it will stop when you switch off the power.
(5) For a glass containing 250ml of distilled water, a time of about 20 minutes should suffice if a 9-volt battery or regulated power-supply is used. For a 12-volt regulated supply the time may be reduced to 12/15 minutes. An unregulated supply set at 6-volts; about 20 mins. An unregulated supply set at 7 1/2 volts,about 12/15 minutes. For different quantities of water vary the time accordingly.
(6) Some people add a tiny pinch of bicarbonate of soda to the water before using the colloidal - silver - maker.This should only be done with distilled or rain - water, and it speeds up the process a little.
(7) The colloidal silver often appears as greyish or honey-gold clouds in the water. Either colour is good, as the greyish colour usually changes to honey-gold or pale brown in time or on exposure to light.
(8) If white or bluish-white clouds appear in the water, this usually means that chlorine is present. The product will still 'work' but is not as good, as it is producing silver chloride instead of colloidal- silver. Because the silver chloride is usually not all colloidal, it tends to settle, so should be used straight away after being made, as it only works well when it is very fresh.
(9) Colloidal silver solution can be stored in clean glass. Best in a dark place. If the colour fades, this means that the solution is no longer good - it is best if it keeps a pale honey-gold or light-brown colour.
(10) There are many ways of using the benefits of colloidal-silver,and much information to be found about it on Internet and at alternative health centres.If you have any queries,do e-mail us:
no1@lightnet.co.uk

CLICK HERE TO ENQUIRE (Visa etc accepted)
ORDER NOW (Non-Paypal)
For Paypal Orders click below

PURCHASE DETAILS & TOTAL PRICE TO PAY
SPECIAL CUSTOM REQUIREMENTS

PAY IN US DOLLARS:

PAY IN POUNDS:

---

HOME. .BANNERS and LINKS